12V 38mm Electric Stainless Submersible Water Pump Diesel Oil Fuel Transfer Refueling Pump Discharge Diesel Water Kerosene Refueling Tool 8700r/m 12 L/min Vane Pump
32,99 $
- MATERIAL: Our Diesel Fuel Transfer Pump is made of stainless steel and aluminum alloy, hard to rust, which is non-toxic materials, anti-corrosion and enduring. It can transfer oil, fuel water or other liquids quickly and safely.
- ITEM SIZE: The pump adopts DC 12V/24V DC motor, put 12v plug in a car battery or a cigarette lighter rather than plug it into a socket. Its diameter is 1.5 inches and the length is 4.6 inches, the outlet diameter is 0.6 inch, 118 inches connection cable with on / off switch.
- BASIC INFORMATION: Voltage: 12V/ 24V; Power: 1.8A (12v); 0.8A (24 V); Rev:8700r.p.m; Flow rate:12 L/Min. It is the major and practical spare parts to your car while driving on the road.
- USAGE: The red click is to connect positive pole, the black click is to connect negative pole. You need to connect correctly the positive and negative pole. it is very easy to use and can reuse multiple times, economical and very practical.The pump is designed for diesel and the bottom of the pump need to be completely submerged in the liquid when it is used.
- GENERAL USE: The pump is designed for diesel and the bottom of the pump need to be completely submerged in the liquid when it is used. More Notes is in the product description.
- Description
- Size Guide
- Reviews (0)
- More Products
- Store Policies
- Inquiries
Description
KUJOBUY brand
Â
Description:
Low noise, fast speed
Seal performance is good, multi-channel seal
Stainless steel shell, not easy to deform, but also to prevent the shell rust, rot.
With a stainless steel filter, make the extracted diesel (or water) cleaner
Specification:
Material: Stainless steel
Color: Silver
Size: 140x38mm
Pump Diameter: 38mm
Voltage: 12V
Maximum Load Current of 1.5A
Motor Speed: 8700r / min
Traffic: 12 L / min
Brand: other
Model: YB-38
Pressure: 2 (Mpa)
Material: Aluminum alloy
Pump shaft position: horizontal
Impeller suction method: single suction
Drive method: electric
Performance: no blockage, corrosion resistance, wear resistance
Uses: submersible pump
Principle: Vane pump
Conveying medium: oil pump
Flow rate: 1900 (m3/h)
Head: 2 (m)
Number of impellers: 6
Instructions:
1. The pump pumping should first take a good self-contain oil hose, and then put the pump completely into the clean oil (or water)
2.The pump after use, should put the pump from the oil (or water) out in time.
3.The bottom of the oil pump filter with stainless steel filter to make the extracted diesel (or water) cleaner. The bottom filter is equipped with a threaded connection for easy removal, maintenance and replacement.
Can achieve the purpose of repeated use.
4.The pump maximum output of oil of 12 L / min
Note:
1.The pump is prohibited pumping gasoline,alcohol and other flammable liquids. Can not load and run dry pumping.
2.The pump should be intermittent work(in each time to use no more than 20 minutes, stop for 10minutes and then continue to use)pay attention to work for not long time
3. Before use, make sure that the power cord and the oil pump power cord are in good contact. voltage tolerance ±5%, note the positive and negative pole.
Package Included:
1 X Submersible Pump
1 X Manual
Only logged in customers who have purchased this product may leave a review.
-
-
-
Automotive
2pcs 12v Car Truck Led Rear Tail Light Waterproof Led Tail Light Turn Signal Lamp Fit for Toyota Land Cruiser FJ40 FJ45 BJ40 HJ45 BJ42
90,80 $There is no AI review summary.Buy now -
-
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.